Switching power supply 3C certification standard
The 3C certification standard of switching power supply is mainly based on the national standards GB4943, GB8898 and GB4706.
Switching power supply is required to provide information for 3C certification
1. 3C certification application
2. The applicant's business license and organization code certificate
3. Product structure diagram, circuit schematic diagram, exploded diagram, etc.
4. List of key components
5. Product nameplate (electronic file)
6. Dimensional drawing of internal insulation sheet
7. Transformer and inductor specifications
8. Chinese product manual (electronic file)
9. Whether to sell components with wires, use altitude and use climatic conditions.
10. Product difference statement (required for each model)
11. Model comparison table of both parties (to be provided for ODM model application)
3C certification process for switching power supply
1. Application acceptance;
2. Document review;
3. Receipt of sent samples;
4. Sample test and check data;
5. The laboratory produces a draft;
6. The draft is correct, upload it for review;
7. CQC preliminary evaluation-+ re-evaluation-+ certificate issuance;
8. Printing, receiving, sending and management of certificates;
9. Factory inspection within 3 months after the first application for 3C certification.
(For factory level C or D, the certificate can only be obtained after factory inspection)
Switching power supply 3C certification test project
1.6.2 Input Current Test (input current test)
1.7.13 Durability of Marking Test (label durability test)
2.1.1.5 Energy Hazard in Operator Access Area (energy hazard test)
2.1.1.7 Discharge of Capacitors (capacitor discharge test of a circuit)
2.2.2 SELV limits for Normal Conditions (safe low voltage test under normal working conditions)
2.2.3 SELV limits for Abnormal Conditions (safe low voltage test under fault conditions)
2.4.2 Limited Current Circuits (Bridging components) (Current Limiting Circuit Test)
2.5 Limited Power Sources (Limited Power Sources Test)
2.6.3.4 Resistance of Earthing Circuit (Earth Continuity Test)
2.9.2 Humidity Conditioning (humidity treatment test)
2.10.2 Working Voltage over Insulation (working voltage test)
3.2.6 Cord Anchorages and Strain Relief Test (cord tightening device and stress relief test)
4.1 Stability Test (10 Tilting Test)
4.2.4 Steady Force Test, 250N (250N constant force test)
4.2.5 Impact Test (Steel Ball)
4.2.6 Drop Test (drop test)
4.2.7 Stress Relief Test (stress relief test)
4.3.6 Torque Test (direct-plug in over 450g) (direct-plug in over 450g)
4.5.1 Maximum Temperature Test (Maximum temperature rise test)
4.5.2 Ball Pressure Test
5.1.6 Touch Current and PE current (leakage current test)
5.2 Electric Strength Test
5.3 Fault Condition Test (abnormal work/fault condition test)
For more information about the 3C certification of switching power supply, please call ZRLK for detailed inquiry. We will provide you with professional and efficient testing and certification services with favorable prices and courteous services. If you provide us with product pictures and specifications, we will give us the corresponding cycle, quotation and specific plan according to your product. Welcome to inquire!
